JCM800 4210 1x12 Combo - Clean Channel

Marshall CODE patch uploaded by: jalex; Last update: Nov 10th, 2016 21:52

5.0 from 4 users

This is as close as I could get a CODE 25 to sound like this JCM combo that I own. I keep the volume very low and the master volume very high as this has lower noise for recording. Any volume beyond 0.2 and you will start to hear a weird hiss in all clean amp models. Just keep the master volume very high and volume on 0.2 If you need a little more volume, activate the compressor. Also you can always just turn the volume up if a little hiss does not bother you...

Modify in live editor   Download for PC Editor

Try / Save the patch on your amp

Web2Amp is available only on Google Chrome 49+ and might not work on other browsers.

  1. Connect your Marshall CODE amp via USB. If you amp is powered off, turn it on and wait a couple of seconds for the OS to recognize the Marshall CODE.
  2. Click the "Preview on amp" button to preview the patch. Nothing is stored permanently on the amp.
  3. If your browser asks for permissions, grant them
  4. Wait a couple of seconds, if you get an error click the "Preview on amp" button again.
  5. If you wish to save the patch on the amp click the "Save on amp" button and enter the patch number where it should be saved.

 

Main Controls

Gain0.2
Bass9.7
Middle5.0
Treble5.0
Threshold0.0
Volume0.2

Pre-amp — JCM800

Power-amp — Classic Marshall 100w

Presence0.0
Resonance10.0

Cabinet — 1974CX

Pedal — Compressor

Tone4.7
Ratio0.0
Compression2.1
Level10.0

Modulation / Disabled

Delay / Disabled

Reverb — Spring

Decay10.0
Pre-delay6.0
Tone6.0
Level5.5